How do I convert a board connected directly to the origin to a remote board?

Have you created a board connected directly to the origin which should be a remote board or vice versa? Well the good news is you can now convert between remote and boards connected directly to the origin for both single phase and three phase boards rather than having to start over. Here's how:

A board connected directly to the origin to a remote board:

1. Select the distribution board you wish to convert

2. Right-click the DB to access the circuit menu

3. Select 'Convert Board to Remote Board'

4. You now have a remote board

 

Remote board to a board connected directly to the origin:

1. Select the remote board you wish to convert

2. Right-click the DB to access the circuit menu

 

3. Select 'Convert Remote Board to Board'

4. You now have a a board connected directly to the origin

Powered by Zendesk